Control Techniques Unidrive M200-04200133: 3kW 230V 1ph to 3ph AC Inverter Drive


In Stock: 1-2 Day Delivery



Nidec – Control Techniques – Unidrive – AC Inverter Drive

Product Code: M200-04200133

Nidec Control Techniques Unidrive M200 series AC Inverter for 3kW (4HP) 230V 3ph motor in VxF or sensorless vector control to 13.3A


Size 4: 115mm wide x 175mm deep x 277mm high; IP20
Mounting via 4 x 6mm diameter holes at rear on 86mm x 265mm centres
Weight: 3.13kg.

Overload: 150% x 60 seconds
Speed Control Range: 0-550Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (does not have to be used; available if required)
100% duty into 22 Ohm, maximum 50 Ohm external resistor (not supplied). See linked products below for compatible resistor.

Fixed keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 1 Digital Input/Output, 1 Relay Contact (normally open). 1 Option Card Slot. Can be commissioned via PC using free Unidrive M Connect software and optional RS485 communications adapter and cable (see linked products below).
STO: Not available on this model.

Onboard PLC included. Programmable via PC using free CODESYS-based Machine Control Studio software and optional RS485 adapter and cable.

Input Current: 23.7A/16.9A
Input Voltage: 200V-240V Single or Three Phase ±10% at 50-60Hz ±5%
Earth Leakage for EMC: 21.3mA (single phase), 9.7mA (three phase) at 50Hz
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial) for cable lengths to 10m.

Cubicle mount.
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm (between drives).
Heat Loss at max output: 110W (at rated ambient temperature and default switching frequency).