Description
Nidec – Control Techniques – Unidrive – AC Inverter Drive
Product Code: M200-01200024
Size 1: 75mm wide x 130mm deep x 160mm high; IP20
Mounting via symetrical DIN rail, or 4 x 5mm diameter holes at rear on 53mm x 143mm centres
Weight: 0.75kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-550Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (does not have to be used; available if required)
100% duty into 130 Ohm, maximum 410 Ohm external resistor (not supplied). See linked products below for compatible resistor.
Fixed keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 1 Digital Input/Output, 1 Relay Contact (normally open). 0 Option Card Slots. Can be commissioned via PC using free Unidrive M Connect software and optional RS485 communications adapter and cable (see linked products below).
STO: Not available on this model.
Onboard PLC included. Programmable via PC using free CODESYS-based Machine Control Studio software and optional RS485 adapter and cable.
Input Current: 5.3A
Input Voltage: 200V-240V Single ±10% at 50-60Hz ±5%
Earth Leakage for EMC: 9.5mA at 50Hz
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial) for cable lengths to 10m.
Cubicle mount.
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm (between drives).
Heat Loss at max output: 27W (at rated ambient temperature and default switching frequency).
