Nidec – Control Techniques – Unidrive – AC Inverter Drive
Product Code: M200-03200100
M200 series AC Inverter for 2.2kW (3HP) 230V 3ph motor in VxF or sensorless vector control to 10A.
Size 3: 90mm wide x 160mm deep x 226mm high; IP20
Mounting via 4 x 5mm diameter holes at rear on 70.7mm x 215mm centres
Overload: 150% x 60 seconds
Speed Control Range: 0-550Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (does not have to be used; available if required)
100% duty into 45 Ohm, maximum 60 Ohm external resistor (not supplied). See linked products below for compatible resistor.
Fixed keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 1 Digital Input/Output, 1 Relay Contact (normally open). 1 Option Card Slot. Can be commissioned via PC using free Unidrive M Connect software and optional RS485 communications adapter and cable (see linked products below).
STO: Not available on this model.
Onboard PLC included. Programmable via PC using free CODESYS-based Machine Control Studio software and optional RS485 adapter and cable.
Input Current: 23.9A/17.7A
Input Voltage: 200V-240V Single or Three Phase ±10% at 50-60Hz ±5%
Earth Leakage for EMC: 17.1mA (single phase), 5.9mA (three phase) at 50Hz
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial) for cable lengths to 2m.
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm (between drives).
Heat Loss at max output: 96W (at rated ambient temperature and default switching frequency).